CVE Explorer

Exact snapshot results

353,537 CVE records

CVE ID descending · no relevance ranking

CVE-2026-10660

The Bluetooth BAP Broadcast Assistant GATT client in subsys/bluetooth/audio/bap_broadcast_assistant.c reassembled remote Broadcast Receive State data into a single file-static net_buf_simple (att_buf, BT_ATT_MAX_ATTRIBUTE_LEN = 512 bytes) shared by all connection instances, while the BUSY flag, long-read handle, and reset/offset state were per-connection. When the device acts as a Broadcast Assistant connected to multiple Scan Delegator peripherals, notification and long-read callbacks from dif

PUBLISHED

Vendor: zephyrproject
Product: zephyr
Provider severity: MEDIUM
Conflicts: 0

CVE-2026-1066

A vulnerability was detected in kalcaddle kodbox up to 1.61.10. This issue affects some unknown processing of the file /?explorer/index/zip of the component Compression Handler. The manipulation results in command injection. The attack may be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

PUBLISHED

Vendor: kalcaddle
Product: kodbox
Provider severity: MEDIUM
Conflicts: 2

CVE-2026-10659

The Dhara flash translation layer disk driver (drivers/disk/ftl_dhara.c) implemented the dhara_nand_ callbacks so that, on a flash error, the error code was written unconditionally through the caller-supplied dhara_error_t err pointer (e.g. *err = DHARA_E_ECC in dhara_nand_read, and similar in dhara_nand_erase/prog/copy). The upstream Dhara library calls these callbacks with err == NULL along its journal-resume binary search: find_last_checkblock() invokes find_checkblock(j, mid, &found, NULL),

PUBLISHED

Vendor: zephyrproject
Product: zephyr
Provider severity: MEDIUM
Conflicts: 0

CVE-2026-10658

bt_iso_recv() in subsys/bluetooth/host/iso.c pulled the ISO SDU header (4 bytes) or, when the timestamp flag is set, the timestamped SDU header (8 bytes) from the inbound HCI ISO Data buffer via net_buf_pull_mem() without first checking buf->len. The upstream hci_iso() handler enforces buf->len == the controller-declared ISO Data_Load length, so a malicious or buggy controller / adjacent BLE peer on an established CIS/BIS can present a first-fragment (BT_ISO_START) or single (BT_ISO_SINGLE) PDU

PUBLISHED

Vendor: zephyrproject
Product: zephyr
Provider severity: HIGH
Conflicts: 1

CVE-2026-10657

Zephyr's DNS resolver detects mDNS (.local) queries in dns_resolve_name_internal() (subsys/net/lib/dns/resolve.c) with memcmp(strrchr(query, '.'), ".local", 7), which always reads a fixed 7 bytes from the suffix pointer. When the resolved hostname's final label is shorter than 7 bytes (e.g. names ending in .org, .com, .net, .io, or a trailing dot), the comparison reads 1-2 bytes past the string's NUL terminator. The hostname (query) is the caller-supplied name passed through the standard getadd

PUBLISHED

Vendor: zephyrproject
Product: zephyr
Provider severity: LOW
Conflicts: 0

CVE-2026-10656

The MAX32xxx USB device controller driver (drivers/usb/udc/udc_max32.c, compatible adi_max32_usbhs) dereferenced an endpoint buffer in its OUT and IN transfer-completion handlers without checking it for NULL. udc_event_xfer_out_done() called net_buf_add(buf, ep_request->actlen) immediately after buf = udc_buf_get(ep_cfg), where udc_buf_get() returns NULL when the endpoint FIFO is empty. A transfer-completion event is queued from interrupt context and processed asynchronously by the driver threa

PUBLISHED

Vendor: zephyrproject
Product: zephyr
Provider severity: MEDIUM
Conflicts: 0

CVE-2026-10655

The asynchronous SNTP client in Zephyr (subsys/net/lib/sntp/sntp.c, sntp_close_async) closed the UDP socket file descriptor directly from the calling thread immediately after detaching it from the network socket service, without synchronizing with the socket-service poll thread. The socket service thread polls each socket via zvfs_poll, which (in zsock_poll_prepare_ctx) registers a k_poll_event pointing into the socket's net_context (&ctx->recv_q) and then blocks in k_poll without holding a ref

PUBLISHED

Vendor: zephyrproject
Product: zephyr
Provider severity: MEDIUM
Conflicts: 0

CVE-2026-10654

A race condition in the Zephyr Bluetooth Classic RFCOMM host stack (subsys/bluetooth/host/classic/rfcomm.c) mishandles a simultaneous bidirectional session disconnect. When the local device has initiated a session teardown (state BT_RFCOMM_STATE_DISCONNECTING, DISC sent, RTX timer armed) and the connected peer concurrently sends its own DISC frame for dlci 0, rfcomm_handle_disc() invokes rfcomm_session_disconnected(), which unconditionally forced the session to BT_RFCOMM_STATE_DISCONNECTED witho

PUBLISHED

Vendor: zephyrproject
Product: zephyr
Provider severity: LOW
Conflicts: 0

CVE-2026-10653

The Zephyr net_buf library (lib/net_buf/buf.c) manipulated both of its reference counts -- the per-header buf->ref and the per-data-block ref_count at the start of each variable/heap data allocation -- with plain non-atomic C operators (buf->ref++, if (--buf->ref > 0), if (--(*ref_count))). The API is documented as self-synchronizing: callers may share one buffer across threads (e.g. via k_fifo) and each holder independently calls net_buf_unref() with no surrounding lock. Under true concurrency

PUBLISHED

Vendor: zephyrproject
Product: zephyr
Provider severity: MEDIUM
Conflicts: 0

CVE-2026-10652

Zephyr's DNS resolver (subsys/net/lib/dns) parses resource records from DNS responses in dns_unpack_answer(), which validated only the fixed RR header (type, class, TTL, rdlength) and accepted any attacker-declared rdlength, including one extending past the end of the received datagram. The TXT and SRV consumers in dns_validate_record() (resolve.c) then read up to rdlength bytes (clamped only to a record-type maximum such as DNS_MAX_TEXT_SIZE, default 64, not to the packet) from the receive buff

PUBLISHED

Vendor: zephyrproject
Product: zephyr
Provider severity: MEDIUM
Conflicts: 0

CVE-2026-10651

bt_sdp_parse_attribute() in subsys/bluetooth/host/classic/sdp.c validated only that the SDP record buffer held the type-marker byte plus the 2-byte attribute ID (a check of buf->len < 3) but then read a fourth byte, the data-element descriptor (type), via net_buf_simple_pull_u8(). Because net_buf_simple_pull_u8() dereferences buf->data[0] before its only bounds guard (an __ASSERT_NO_MSG that compiles out when CONFIG_ASSERT is disabled, the production default), a record of exactly three bytes (0x

PUBLISHED

Vendor: zephyrproject
Product: zephyr
Provider severity: HIGH
Conflicts: 1

CVE-2026-10650

A flaw has been found in warmcat libwebsockets up to 4.5.8. This issue affects the function lws_ssh_parse_plaintext of the file plugins/protocol_lws_ssh_base/sshd.c of the component SSH Protocol Handler. Executing a manipulation of the argument msg_len can lead to resource consumption. The attack may be launched remotely. The exploit has been published and may be used. This patch is called 3f9f0c6ecaf0e6f3f219d30632c5d1f2479d7498. A patch should be applied to remediate this issue.

PUBLISHED

Vendor: warmcat
Product: libwebsockets
Provider severity: MEDIUM
Conflicts: 2

CVE-2026-1065

The Form Maker by 10Web plugin for WordPress is vulnerable to Stored Cross-Site Scripting in all versions up to, and including, 1.15.35. This is due to the plugin's default file upload allowlist including SVG files combined with weak substring-based extension validation. This makes it possible for unauthenticated attackers to upload malicious SVG files containing JavaScript code that will execute when viewed by administrators or site visitors via file upload fields in forms granted they can subm

PUBLISHED

Vendor: 10web
Product: Form Maker by 10Web – Mobile-Friendly Drag & Drop Contact Form Builder
Provider severity: HIGH
Conflicts: 0

CVE-2026-10649

A flaw was found in Pacemaker. An unauthenticated remote attacker can exploit an integer overflow vulnerability in the remote message decompression process. By sending a specially crafted compressed remote message before authentication, an attacker can cause memory corruption, leading to a denial of service (DoS) in the CIB remote listener. This can result in the affected service crashing.

PUBLISHED

Vendor: Red Hat, Red Hat, Red Hat, Red Hat, Red Hat, Red Hat, Red Hat, Red Hat, Red Hat, Red Hat, Red Hat, Red Hat, Red Hat, Red Hat, Red Hat, Red Hat, Red Hat, Red Hat, Red Hat, Red Hat, Red Hat, Red Hat, Red Hat, Red Hat, Red Hat, Red Hat, Red Hat, Red Hat, Red Hat, Red Hat, Red Hat, Red Hat
Product: Red Hat Enterprise Linux 10, Red Hat Enterprise Linux 7 Extended Lifecycle Support, Red Hat Enterprise Linux 8.6 Advanced Mission Critical Update Support, Red Hat Enterprise Linux 8.6 Advanced Mission Critical Update Support, Red Hat Enterprise Linux 9.4 Update Services for SAP Solutions, Red Hat Enterprise Linux 10.0 Extended Update Support, Red Hat Enterprise Linux 9.6 Extended Update Support, Red Hat Enterprise Linux 9.4 Update Services for SAP Solutions, Red Hat Enterprise Linux 9, Red Hat Enterprise Linux 10.0 Extended Update Support, Red Hat Enterprise Linux 8.8 Update Services for SAP Solutions, Red Hat Enterprise Linux 8.6 Extended Update Support Long-Life Add-On, Red Hat Enterprise Linux 8.6 Extended Update Support Long-Life Add-On, Red Hat Enterprise Linux 9, Red Hat OpenShift Container Platform 4, Red Hat Enterprise Linux 8.8 Update Services for SAP Solutions, Red Hat Enterprise Linux 8, Red Hat Enterprise Linux 6, Red Hat OpenShift Container Platform 4, Red Hat Enterprise Linux 6, Red Hat Enterprise Linux 8.4 Advanced Mission Critical Update Support, Red Hat Enterprise Linux 10, Red Hat Enterprise Linux 8.8 Telecommunications Update Service, Red Hat Enterprise Linux 8.4 Extended Update Support Long-Life Add-On, Red Hat Enterprise Linux 9.2 Update Services for SAP Solutions, Red Hat Enterprise Linux 9.6 Extended Update Support, Red Hat Enterprise Linux 7 Extended Lifecycle Support, Red Hat Enterprise Linux 8, Red Hat Enterprise Linux 9.2 Update Services for SAP Solutions, Red Hat Enterprise Linux 8.8 Telecommunications Update Service, Red Hat Enterprise Linux 8.4 Extended Update Support Long-Life Add-On, Red Hat Enterprise Linux 8.4 Advanced Mission Critical Update Support
Provider severity: HIGH
Conflicts: 1

CVE-2026-10648

mcumgr_serial_process_frag() in subsys/mgmt/mcumgr/transport/src/serial_util.c calls net_buf_reset() on the result of smp_packet_alloc() before checking it for NULL. smp_packet_alloc() uses net_buf_alloc(K_NO_WAIT) against the shared MCUmgr packet pool (CONFIG_MCUMGR_TRANSPORT_NETBUF_COUNT, default 4), which returns NULL when the pool is exhausted. In default builds the __ASSERT_NO_MSG in net_buf_reset is a no-op, so net_buf_simple_reset writes through the NULL pointer (buf->len = 0; buf->data =

PUBLISHED

Vendor: zephyrproject
Product: zephyr
Provider severity: MEDIUM
Conflicts: 0

CVE-2026-10647

The USB CDC-NCM device class (subsys/usb/device_next/class/usbd_cdc_ncm.c) ignores the return value of usbd_ep_enqueue() in its ethernet transmit callback cdc_ncm_send(). When the enqueue fails, the function still calls k_sem_take(&data->sync_sem, K_FOREVER), blocking on a completion semaphore that is only ever signaled from the bulk-IN transfer-completion callback. Because nothing was enqueued, that callback never fires and the calling thread — a shared network traffic-class TX thread — deadloc

PUBLISHED

Vendor: zephyrproject
Product: zephyr
Provider severity: MEDIUM
Conflicts: 0

CVE-2026-10646

Zephyr's BSD-sockets getaddrinfo() implementation (subsys/net/lib/sockets/getaddrinfo.c) passes a pointer to a stack-allocated state object (struct getaddrinfo_state ai_state) as the user_data of an asynchronous DNS resolver query. The socket layer waits on a semaphore with a timeout deliberately set slightly longer than the resolver's own per-query timeout. When that semaphore wait nonetheless times out (-EAGAIN) - which can occur when the resolver's timeout work is delayed by workqueue content

PUBLISHED

Vendor: zephyrproject
Product: zephyr
Provider severity: HIGH
Conflicts: 0

CVE-2026-10645

The Zephyr ext2 filesystem driver (subsys/fs/ext2) trusted the on-disk directory entry fields de_rec_len and de_name_len when walking a directory block. ext2_fetch_direntry() guarded only with de_name_len > EXT2_MAX_FILE_NAME, but de_name_len is a uint8_t and EXT2_MAX_FILE_NAME is 255, so the check is always false; the function then memcpy'd up to 255 name bytes and the lookup/readdir paths advanced traversal by an unvalidated de_rec_len. Each directory block is read into a block_size-sized slab

PUBLISHED

Vendor: zephyrproject
Product: zephyr
Provider severity: MEDIUM
Conflicts: 0

CVE-2026-10644

The Microchip SERCOM-G1 UART driver (drivers/serial/uart_mchp_sercom_g1.c), used by the PIC32CM-JH SoC family, contains an out-of-bounds write in its asynchronous (DMA) receive path. When uart_rx_enable() is invoked with a one-byte receive buffer (len == 1) and CONFIG_UART_MCHP_ASYNC is enabled, the RX-complete ISR starts a single-beat DMA transfer while a received byte is already pending in the SERCOM DATA register. On this SoC the peripheral-triggered DMA start sequencing then writes one byte

PUBLISHED

Vendor: zephyrproject
Product: zephyr
Provider severity: MEDIUM
Conflicts: 0

CVE-2026-10643

Zephyr's IP socket recvmsg() implementation (subsys/net/lib/sockets/sockets_inet.c, insert_pktinfo()) validated the user-supplied ancillary (msg_control) buffer using only the payload length (msg->msg_controllen < pktinfo_len) before writing a full control message consisting of an aligned cmsg header plus the payload. Because the check omitted the cmsg header size, a control buffer whose length falls in the under-checked window (e.g. 16-27 bytes for IPv4 IP_PKTINFO on a 64-bit target, where a si

PUBLISHED

Vendor: zephyrproject
Product: zephyr
Provider severity: HIGH
Conflicts: 0

CVE-2026-10642

The Zephyr PL011 UART driver (drivers/serial/uart_pl011.c) contains an unbounded software loop in pl011_irq_tx_enable() that repeatedly invokes the interrupt-driven application callback while the TX interrupt mask bit (PL011_IMSC_TXIM) is set, to work around the controller's level-transition TX-interrupt behavior. When CTS hardware flow control is enabled (devicetree hw-flow-control or runtime UART_CFG_FLOW_CTRL_RTS_CTS) and the wired serial peer de-asserts CTS, the controller stops draining th

PUBLISHED

Vendor: zephyrproject
Product: zephyr
Provider severity: MEDIUM
Conflicts: 1

CVE-2026-10641

Zephyr's Bluetooth Classic Hands-Free Profile (HFP) Hands-Free role parser (subsys/bluetooth/host/classic/hfp_hf.c) contains an out-of-bounds write. During Service Level Connection setup the HF sends AT+CIND=? and parses the AG's +CIND: response in cind_handle(), which assigns a per-entry counter index and calls cind_handle_values() for each list element. cind_handle_values() then wrote hf->ind_table[index] = i without verifying that index is within the 20-element int8_t ind_table[] array of str

PUBLISHED

Vendor: zephyrproject
Product: zephyr
Provider severity: HIGH
Conflicts: 0

CVE-2026-10640

Zephyr's IPv6 Neighbor Discovery send paths (net_ipv6_send_na, net_ipv6_send_ns, net_ipv6_send_rs in subsys/net/ip/ipv6_nbr.c) updated the per-interface ICMP-sent statistics by calling net_pkt_iface(pkt) after net_send_data(pkt) had already returned successfully. On the success path the network stack owns and releases the packet's reference (the L2/driver send unrefs it, e.g. ethernet_send -> net_pkt_unref), so for a freshly allocated packet with refcount 1 the net_pkt slab block can be freed be

PUBLISHED

Vendor: zephyrproject
Product: zephyr
Provider severity: MEDIUM
Conflicts: 0

CVE-2026-1064

A vulnerability was found in bastillion-io Bastillion up to 4.0.1. This issue affects some unknown processing of the file src/main/java/io/bastillion/manage/control/SystemKtrl.java of the component System Management Module. Performing a manipulation results in command injection. The attack can be initiated remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

PUBLISHED

Vendor: bastillion-io
Product: Bastillion
Provider severity: MEDIUM
Conflicts: 2

CVE-2026-10639

In Zephyr's native IPv4 stack, icmpv4_handle_echo_request() in subsys/net/ip/icmpv4.c builds an echo-reply packet (reply), hands it to net_try_send_data(), and then, on success, calls net_stats_update_icmp_sent(net_pkt_iface(reply)). net_try_send_data() transfers ownership of reply to the TX path (net_if_try_queue_tx -> net_if_tx -> L2/driver send, or the asynchronous net_if_tx_thread), which can unref it to refcount 0 and return the struct net_pkt to its slab (net_pkt_unref -> k_mem_slab_free)

PUBLISHED

Vendor: zephyrproject
Product: zephyr
Provider severity: MEDIUM
Conflicts: 0

CVE-2026-10638

subsys/net/ip/icmpv6.c reads the network interface from a net_pkt after that packet has been handed to net_try_send_data(). In icmpv6_handle_echo_request() and net_icmpv6_send_error(), the post-send statistics update calls net_pkt_iface(reply)/net_pkt_iface(pkt) on the just-sent packet. The send path (net_try_send_data -> net_if_tx) unreferences and may free the packet back to its memory slab before returning — synchronously in the RX thread when no TX queue is configured (CONFIG_NET_TC_TX_COUN

PUBLISHED

Vendor: zephyrproject
Product: zephyr
Provider severity: MEDIUM
Conflicts: 0

CVE-2026-10637

subsys/net/ip/ipv6_mld.c:mld_send() read the packet interface via net_pkt_iface(pkt) after net_send_data(pkt) returned successfully. Per the network stack's ownership contract (include/zephyr/net/net_core.h, and the explicit warning in subsys/net/ip/net_core.c:453-460 'do not use pkt after that call'), a successful send transfers ownership of the net_pkt and the L2 driver frees it (e.g. ethernet_send() unrefs the packet on success, subsys/net/l2/ethernet/ethernet.c:790), returning it to its k_me

PUBLISHED

Vendor: zephyrproject
Product: zephyr
Provider severity: MEDIUM
Conflicts: 0

CVE-2026-10636

In Zephyr's IPv4 IGMP implementation, igmp_send() in subsys/net/ip/igmp.c read the network interface back out of the packet via net_pkt_iface(pkt) after the packet had been handed to net_send_data(). On the successful-send path the packet's last reference may already have been released by the L2 driver or by the network stack's TX handling (synchronously in the default NET_TC_TX_COUNT=0 immediate-transmit configuration), returning the net_pkt slab block to its free list. The subsequent net_pkt_i

PUBLISHED

Vendor: zephyrproject
Product: zephyr
Provider severity: LOW
Conflicts: 0

CVE-2026-10635

On Xtensa targets with CONFIG_USERSPACE and CONFIG_XTENSA_MMU, the page-table code (arch/xtensa/core/ptables.c) maintains a global list, xtensa_domain_list, of active memory domains using a list node embedded inside the caller-owned struct k_mem_domain. When a domain is destroyed via k_mem_domain_deinit() -> arch_mem_domain_deinit(), the page tables are torn down and domain->arch.ptables is set to NULL, but the domain's node was not removed from xtensa_domain_list. The freed/deinitialized domain

PUBLISHED

Vendor: zephyrproject
Product: zephyr
Provider severity: MEDIUM
Conflicts: 0

CVE-2026-10634

Zephyr's native TCP stack iterates the global connection list in net_tcp_foreach() (subsys/net/ip/tcp.c) using the SYS_SLIST_FOR_EACH_CONTAINER_SAFE macro, which caches a pointer to the next list node. Prior to this fix the function released tcp_lock while invoking the per-connection callback and re-acquired it afterwards. During that window a concurrent tcp_conn_release(), running on the dedicated TCP work-queue thread when a connection's reference count drops to zero (e.g. a remote peer closi

PUBLISHED

Vendor: zephyrproject
Product: zephyr
Provider severity: MEDIUM
Conflicts: 0

CVE-2026-1063

A vulnerability has been found in bastillion-io Bastillion up to 4.0.1. This vulnerability affects unknown code of the file src/main/java/io/bastillion/manage/control/AuthKeysKtrl.java of the component Public Key Management System. Such manipulation leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

PUBLISHED

Vendor: bastillion-io
Product: Bastillion
Provider severity: MEDIUM
Conflicts: 2

CVE-2026-10629

SIP signaling stack in Verizon IMS (unspecified version) implements SIP signaling without IPsec integrity protection (missing Security-Client/Security-Server headers and ESP traffic), which allows an on-path attacker to compromise confidentiality, integrity, and authenticity of VoLTE signaling via passive monitoring and active manipulation of unsecured SIP messages over the radio and core network.

PUBLISHED

Vendor: Verizon
Product: VoLTE
Provider severity: HIGH
Conflicts: 1

CVE-2026-10628

The Points and Rewards for WooCommerce plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 2.10.0. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with subscriber-level access and above, to convert and drain any user's reward points into wallet balance, exfiltrate all users' emails and point balances to an attacker-controlled Klaviyo account, overwrite

PUBLISHED

Vendor: wpswings
Product: Points and Rewards for WooCommerce
Provider severity: MEDIUM
Conflicts: 0

CVE-2026-10624

A vulnerability has been found in SourceCodester Human Resource Management 1.0. Affected by this vulnerability is an unknown functionality of the file /detailview.php of the component Employee View Page. Such manipulation of the argument employeeid leads to improper control of resource identifiers. The attack may be performed from remote. The exploit has been disclosed to the public and may be used.

PUBLISHED

Vendor: SourceCodester
Product: Human Resource Management
Provider severity: MEDIUM
Conflicts: 1

CVE-2026-10623

The PressPrimer Quiz – AI Quiz Maker, Exam Builder & LMS Assessment Plugin plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 2.3.0 via the 'rule_id' parameter due to missing validation on a user controlled key. This makes it possible for authenticated attackers, with custom-level access and above, to modify or delete quiz rules belonging to other teachers, resulting in unauthorized tampering of another user's quiz structure.

PUBLISHED

Vendor: pressprimer
Product: PressPrimer Quiz – AI Quiz Maker, Exam Builder & LMS Assessment Plugin
Provider severity: MEDIUM
Conflicts: 0

CVE-2026-10622

Improper Authentication in REST API in Collibra Agent, allows a remote unauthenticated attacker to access privileged functionality via exposed '/rest/* endpoints.

PUBLISHED

Vendor: Collibra, Collibra, Collibra, Collibra, Collibra, Collibra, Collibra
Product: Collibra Platform (SaaS), Collibra Platform (on-prem), Collibra Platform (on-prem), Collibra Platform (SaaS), Collibra Platform (SaaS), Collibra Platform (SaaS), Collibra Platform (SaaS)
Provider severity: HIGH
Conflicts: 2

CVE-2026-10621

Path traversal in restore handler in Collibra Agent, allows an attacker to write arbitrary files via a crafted ZIP archive. Collibra Agent fails to properly validate and canonicalize file path during ZIP extraction, this can allow an attacker to write files outside the intended extraction directory.

PUBLISHED

Vendor: Collibra, Collibra, Collibra, Collibra, Collibra, Collibra, Collibra
Product: Collibra Platform (on-prem), Collibra Platform (SaaS), Collibra Platform (on-prem), Collibra Platform (SaaS), Collibra Platform (SaaS), Collibra Platform (SaaS), Collibra Platform (SaaS)
Provider severity: HIGH
Conflicts: 2

CVE-2026-10620

A flaw has been found in code-projects Student Admission System 1.0. Affected is an unknown function of the file /index.php. This manipulation of the argument eid/did causes sql injection. The attack is possible to be carried out remotely. The exploit has been published and may be used.

PUBLISHED

Vendor: code-projects
Product: Student Admission System
Provider severity: HIGH, MEDIUM
Conflicts: 2

CVE-2026-1062

A flaw has been found in xiweicheng TMS up to 2.28.0. This affects the function Summary of the file src/main/java/com/lhjz/portal/util/HtmlUtil.java. This manipulation of the argument url causes server-side request forgery. It is possible to initiate the attack remotely. The exploit has been published and may be used.

PUBLISHED

Vendor: xiweicheng
Product: TMS
Provider severity: MEDIUM
Conflicts: 1

CVE-2026-10619

A vulnerability was detected in sayan365 student-management-system up to 7f3c9ce7d410332335c2affac93a385485051800. This impacts an unknown function. The manipulation results in improper authentication. The attack can be executed remotely. The exploit is now public and may be used. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. Multiple endpoints are affected. The project was informed of the problem

PUBLISHED

Vendor: sayan365
Product: student-management-system
Provider severity: HIGH, MEDIUM
Conflicts: 1

CVE-2026-10617

A security vulnerability has been detected in nextlevelbuilder GoClaw up to 3.11.3. This affects the function resolveAuth of the file internal/http/auth.go of the component Webhook Verification Handler. The manipulation leads to missing authentication. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. The project tagged the reported issue as bug.

PUBLISHED

Vendor: nextlevelbuilder
Product: GoClaw
Provider severity: HIGH, MEDIUM
Conflicts: 2

CVE-2026-10616

A weakness has been identified in nextlevelbuilder GoClaw up to 3.11.3. The impacted element is the function TeamTasksTool.executeComplete of the file internal/tools/team_tasks_lifecycle.go of the component Team Task Completion Handler. Executing a manipulation can lead to missing authorization. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks. The project tagged the reported issue as bug.

PUBLISHED

Vendor: nextlevelbuilder
Product: GoClaw
Provider severity: MEDIUM
Conflicts: 2

CVE-2026-10611

An authentication bypass vulnerability exists in MISP when LDAP mixed authentication is enabled with OTP enforcement. In deployments configured with LdapAuth.mixedAuth=true and Security.require_otp=true, users authenticated through an authentication plugin, such as LDAP, may have their authenticated session established during the application beforeFilter phase before the normal login flow enforces the OTP challenge. As a result, an attacker with valid primary authentication credentials could

PUBLISHED

Vendor: misp
Product: misp
Provider severity: HIGH
Conflicts: 0

CVE-2026-10610

Local privilege escalation potentially allowed an attacker to execute arbitrary code as a privileged user.

PUBLISHED

Vendor: ESET spol. s.r.o., ESET spol. s.r.o.
Product: ESET Cyber Security for macOS, ESET Endpoint Security for macOS
Provider severity: HIGH
Conflicts: 1

CVE-2026-1061

A vulnerability was detected in xiweicheng TMS up to 2.28.0. Affected by this issue is the function Upload of the file src/main/java/com/lhjz/portal/controller/FileController.java. The manipulation of the argument filename results in unrestricted upload. The attack may be performed from remote. The exploit is now public and may be used.

PUBLISHED

Vendor: xiweicheng
Product: TMS
Provider severity: MEDIUM
Conflicts: 2

CVE-2026-10609

A missing authorization flaw was found in the OpenShift Cluster Logging Operator. The operator creates and forwards ServiceAccount tokens to output destinations without verifying that the ClusterLogForwarder creator has permission to use those credentials, allowing a delegated editor to exfiltrate SA tokens and escalate privileges.

PUBLISHED

Vendor: Red Hat
Product: Logging Subsystem for Red Hat OpenShift
Provider severity: MEDIUM
Conflicts: 0

CVE-2026-10608

A security flaw has been discovered in DedeCMS 5.7.88. This affects the function RemoveXSS of the file /plus/carbuyaction.php. The manipulation of the argument postname/des results in sql injection. The attack may be launched remotely. The exploit has been released to the public and may be used for attacks.

PUBLISHED

Vendor: n/a
Product: DedeCMS
Provider severity: HIGH, MEDIUM
Conflicts: 2

CVE-2026-10607

A vulnerability was identified in DedeCMS 5.7.88. The impacted element is the function dede_htmlspecialchars of the file /plus/flink.php. The manipulation of the argument msg leads to sql injection. The attack may be initiated remotely. The exploit is publicly available and might be used.

PUBLISHED

Vendor: n/a
Product: DedeCMS
Provider severity: HIGH, MEDIUM
Conflicts: 2

CVE-2026-10606

A vulnerability was determined in DedeCMS 5.7.88. The affected element is the function TrimMsg of the file /plus/feedback.php of the component Feedback Handler. Executing a manipulation of the argument msg can lead to sql injection. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized.

PUBLISHED

Vendor: n/a
Product: DedeCMS
Provider severity: HIGH, MEDIUM
Conflicts: 2

CVE-2026-10601

A user with Viewer permissions can use specially crafted requests to the Tempo and Loki data source plugins to reach unintended backend endpoints. Depending on the backend configuration this can expose data source credentials, leak internal responses, or trigger administrative actions on the configured backend.

PUBLISHED

Vendor: Grafana
Product: Grafana OSS
Provider severity: MEDIUM
Conflicts: 1